Home / Career Explorer / Construction and Extraction

Cement Masons and Concrete Finishers

	Median Wage (USD, 2024)	Projected Job Openings (2024-2034)	Projected Growth (2024-2034)
National Statistics	$54660	14300	1.8%
State Statistics	-	-	-
City Statistics	-	-	-

Statistics

National

State

City

State

City

$54660

Median Wage (USD, 2024)

14300

Projected Job Openings (2024-2034)

1.8%

Projected Growth (2024-2034)

Smooth and finish surfaces of poured concrete, such as floors, walks, sidewalks, roads, or curbs using a variety of hand and power tools. Align forms for sidewalks, curbs, or gutters; patch voids; and use saws to cut expansion joints.

Experience Requirements Overview

Job Zone 1-2: Very Little to Some Preparation Needed
Some occupations may need little or no previous experience; others require several months to a year of experience. For example, landscaping and groundskeeping workers might require very little training or previous experience, while agricultural equipment operators can benefit from on-the job training.
Usually requires a high school diploma or GED, though some occupations may not.
Ranges from a few days to one year of on-the-job training.

Education, Training and Experience

Required Level of Education: Less than a High School Diploma

Related Work Experience: N.A.

On-Site or In-Plant Training: N.A.

On-the-Job Training: Anything beyond short demonstration, up to and including 1 month

Detailed Work Activities

Inspect completed work to ensure proper installation.
Position construction forms or molds.
Spread concrete or other aggregate mixtures.
Finish concrete surfaces.
Monitor construction operations.
Pour materials into or on designated areas.
Signal equipment operators to indicate proper equipment positioning.
Compact materials to create level bases.
Direct construction or extraction personnel.
Mix substances or compounds needed for work activities.
Drill holes in construction materials.
Position structural components.
Break up rock, asphalt, or concrete.
Prepare surfaces for finishing.
Install masonry materials.
Apply material to fill gaps in surfaces.
Clean surfaces in preparation for work activities.
Apply sealants or other protective coatings.
Smooth surfaces with abrasive materials or tools.
Install roofing materials.
Build construction forms or molds.
Apply decorative masonry finishes.
Cut metal components for installation.
Fabricate parts or components.
Install metal structural components.
Install building fixtures.

Work Values

Achievement

Occupations that satisfy this work value are results oriented and allow employees to use their strongest abilities, giving them a feeling of accomplishment. Corresponding needs are Ability Utilization and Achievement.

Working Conditions

Recognition

Relationships

Support

Independence

Tasks

Check the forms that hold the concrete to see that they are properly constructed.
Set the forms that hold concrete to the desired pitch and depth, and align them.
Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.
Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.
Mold expansion joints and edges, using edging tools, jointers, and straightedge.
Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.
Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it.
Produce rough concrete surface, using broom.
Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.
Operate power vibrator to compact concrete.
Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish.
Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel.
Waterproof or restore concrete surfaces, using appropriate compounds.
Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools.
Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill.
Wet concrete surface, and rub with stone to smooth surface and obtain specified finish.
Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
Build wooden molds, and clamp molds around area to be repaired, using hand tools.
Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.
Fabricate concrete beams, columns, and panels.
Polish surface, using polishing or surfacing machine.
Cut metal division strips, and press them into terrazzo base so that top edges form desired design or pattern.
Push roller over surface to embed chips in surface.
Apply muriatic acid to clean surface, and rinse with water.
Spread roofing paper on surface of foundation, and spread concrete onto roofing paper with trowel to form terrazzo base.

Work Styles

Innovation

A tendency to be inventive, to be imaginative, and to adopt new perspectives on ways to accomplish work.

Innovation

Achievement Orientation

Intellectual Curiosity

Tolerance for Ambiguity

Initiative

Adaptability

Self-Confidence

Perseverance

Leadership Orientation

Humility

Sincerity

Empathy

Cooperation

Optimism

Social Orientation

Cautiousness

Attention to Detail

Dependability

Integrity

Stress Tolerance

Self-Control

Data Source: This page includes information from the O*NET 30.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. This page includes Employment Projections program, Occupational Employment and Wage Statistics program, U.S. Bureau of Labor Statistics.

Session has been expired